This is a printable trucker log book built for the business side of the truck: record sheets you write at the time, a pocket-and-visor card set for the cab, and a fillable PDF that works out your detention claim, settlement check and true rate per mile once you type in what you wrote. It is an instant download of 18 PDFs plus a READ-ME-FIRST.txt.
Small amounts are easy to lose when they go unwritten: the wait at the dock, the lumper receipt that went into the door pocket, the settlement that came in a little under what the rate confirmation said. By the time you look for them, the details are gone. The method here is simple: write it at the time, put the receipt in the envelope, and tie it to the trip and to the settlement.
It is not an HOS or ELD log. It does not replace one, and it is not a compliance record. It is your own business paperwork.
How do I work out a detention claim?
The Detention & Lumper Claim slip is built for the clock times you write at the dock. Type the arrival, the time you were loaded or unloaded and the free time on your rate confirmation. It rounds your billable hours down to the increment your rate confirmation uses, adds the lumper, and gives you the total claim and one plain sentence to send.
You are not guessing at the math after the fact, and you are not rebuilding a day from memory. The slip works from what you wrote when it happened.
How do I check my settlement against the rate confirmation?
The Settlement Review slip sets what the rate confirmation said against what the settlement paid, pay line by pay line. Beside it, each deduction you agreed to sits next to the deduction actually taken. What is left is the amount to raise, worked out in one place instead of scattered across a pile of paper.
A total that looks fine can hide a short pay line. Checking line by line is how you find it.
What did that load really pay per mile?
A rate per loaded mile flatters a load. The Trip & Load Sheet works your true rate per total mile, empty miles included, and sets it against your own break-even so you can see the margin, positive or negative. It also records the state lines you crossed and the miles in each state. The sheet keeps the lumper reimbursement out of revenue, so it can’t flatter the load.
The sheet does not calculate any tax. It keeps the miles and the odometer readings in one place, tied to the load they belong to. If you are still deciding whether a load is worth taking in the first place, our guide Should I take this load? walks through that decision.
How do I keep fuel receipts straight?
The Fuel & Receipt Envelope Log has a row for each fill, with the gallons × price check against the receipt, the MPG, the state, the envelope number and the load number. Copy the receipt while it is still readable, put it in the envelope, and the paper trail is already tied to the trip.
Is there a daily pre-trip and post-trip check I can print?
Yes. The Daily Pre-Trip & Post-Trip Check is one page with 44 items, marked Pre or Post, and a box for defects. A 4-page “What to Look At” reference stays in the binder so the page itself stays uncluttered. It is your own record of the walk-around, not a DVIR.
The record sheets also include a Maintenance & Repair Log, and an Accident & Incident Sheet with a tear-off witness slip for the day you hope never comes.
What goes on the cab reference cards?
There are 5 card designs and 12 cut-out cards in all, because the pocket card prints 8 to a sheet. Print them at 100% on card stock and cut on the trim marks:
- If You’re in an Incident, the pocket card, 8 to a sheet.
- Service Intervals, with the next-due odometer.
- Tires & PM.
- Document Locations, so you and anyone else in the cab know where things are.
- Roadside Docs, what to keep within reach at a roadside stop.
One filled example sheet shows how each card looks once it is written in.
How does the fillable PDF work?
The fillable file is 13 pages with 792 fillable fields, 123 of them calculated. It holds the 6 money slips: Detention & Lumper Claim, Settlement Review, Trip True Rate vs Break-Even, Fuel & Receipt Envelope Log, Service Intervals and the 52-Week Rollup.
The calculations run in Adobe Acrobat Reader. Other viewers vary, and many browser and phone viewers skip the math, though every field still types, so open the fillable file in Reader if you want the math done for you. Every slip also prints, so you can fill it in by hand.
The printed record sheets carry matching Detention & Lumper, Settlement Review, Trip and Fuel pages for writing by hand at the dock. The fillable file is the version that does the arithmetic.
Is there a 52-week log?
The 52-week log gives you a page for every week plus a Year at a Glance. Each week page rolls up on Sunday, so revenue, revenue per total mile, the detention you claimed against what was paid, and the short-pays you found sit in one place. The binder cover and 8 dividers keep it all in one binder, one tab per section: inspections, trips, fuel, maintenance, incidents, detention, settlements and the 52-week log.
Print it your way
Everything prints at 100%. The sets come in US Letter and A4; the A4 files end in -A4, so print the edition that matches your paper rather than scaling the other one. The record sheets and week log also come in a low-ink edition for when you would rather not burn through a color cartridge. The set is 18 PDFs and 457 pages, counting both paper sizes, plus a READ-ME-FIRST.txt, as an instant download of about 4.7 MB zipped.
A 31-page worked example follows one invented owner-operator through a full week, with every sheet and money slip filled in. Every name in it is fictional.
If you want to try the approach before you buy, the free Trip & Load Sheet is ungated: no email, no signup. It is this set’s trip sheet cut down to one printable page, with the stops, the miles and the pay, and lines A to F that show what a load paid per loaded mile against per total mile. It opens on the same invented load filled in, in US Letter and A4. What it cannot do is set the load against your break-even, work out detention or a lumper you are owed, or check a settlement against the rate con.
Own it, don’t rent it
This is a one-time purchase. There is no subscription, no login, and nothing that stops working when someone decides to change a pricing plan. You print what you need, for this truck and the next one.
If your one truck turns into a bigger business, Ardent Seller (opens in new tab) is our operations app for small businesses, with a free plan to start. For a one-truck record you keep in your own binder, this set is enough.
If you would rather keep the numbers in a spreadsheet, the Owner-Operator Trucking Ops Workbook covers cost-per-mile, loads and settlements in Excel and Google Sheets.
What this is, and what it is not
This is a business record set for an owner-operator. It is not an HOS or ELD log, and it is not tax, legal or compliance advice. All names and figures in the worked example are invented. Your authority, licensing, tax filings, hours-of-service and recordkeeping obligations are yours to meet for your own situation.